Table of Contents
- 6k8 NTC Thermistor OEM Selection
- What the 6k8 Marking Tells You
- How to Verify the R/T Curve
- Match the Circuit and Probe Assembly
- OEM Validation and RFQ Checklist
- Confirm the Complete Configuration
6k8 NTC Thermistor OEM Selection
“6k8” is commonly used to denote a nominal resistance of 6.8 kΩ, but the marking alone is not a complete sensor specification. Before choosing a 6k8 NTC thermistor, confirm the exact ordering code, reference temperature, resistance tolerance and manufacturer’s resistance–temperature (R/T) data. A nominal value does not establish the part’s usable temperature range, accuracy in an assembly or suitability for a particular industry.
What the 6k8 Marking Tells You
An NTC thermistor’s resistance decreases as its temperature rises. A “6k8” designation describes a nominal resistance value only when interpreted with the manufacturer’s reference conditions. Do not assume that it means 6.8 kΩ at 25 °C unless the datasheet confirms that reference temperature and tolerance. The marking does not identify the B-value interval, complete R/T curve, package, leads, probe construction or operating limits.
How to Verify the R/T Curve
- Match the full part number: Use the current manufacturer datasheet for the exact ordering code and revision.
- Check reference resistance and tolerance: Confirm the stated temperature, test conditions and whether tolerance applies at one point or across the range.
- Use model-specific R/T data: Compare values at the temperatures your design needs. Do not substitute a generic 6.8 kΩ chart from another thermistor.
- Confirm the B-value interval: If your conversion uses a beta approximation, verify both reference temperatures and validate the approximation across the required span.
TDK’s NTC technical information explains R/T behavior, resistance tolerance and beta values as general background. The selected part’s datasheet remains the source for its specifications. For more detail, see our NTC thermistor chart and R/T guide.
Match the Circuit and Probe Assembly
Select the thermistor together with the readout circuit. Review the reference resistor, controller input range, ADC resolution, excitation current, wiring and firmware conversion. Include component tolerances and self-heating in the system error budget. Our NTC circuit and ADC guide covers these integration checks.
For a probe assembly, define the sensing location, contact or immersion, housing materials, dimensions, cable and connector, medium and environmental exposure. Thermal contact and mounting affect the measured result. Confirm response and operating limits using evidence for the exact part and finished assembly; do not infer them from the 6k8 resistance marking.
OEM Validation and RFQ Checklist
Before qualification or quotation, provide:
- Exact part number, datasheet revision and required nominal resistance/reference temperature.
- Required R/T curve, tolerance, temperature span and system error target.
- Controller input, circuit conditions, calibration points and validation method.
- Probe dimensions, materials, mounting, cable, connector and operating environment.
- Sample quantity, annual volume and any drawing or approval requirements.
Validate representative assemblies with the production circuit and an appropriate temperature reference at points across the required span. Explore our NTC sensor range or request an OEM quotation with your target curve and probe requirements.
Confirm the Complete Configuration
A 6k8 NTC thermistor can be evaluated only against its full datasheet and intended measurement system. Confirm the exact curve, circuit, probe assembly and test conditions before final selection; the resistance marking by itself is not a performance guarantee.


